Main Page
Wiki for UiB's NanoStructures Laboratory.
UiB's NanoStructures laboratory is equipped with modern thin-film processing, lithography equipment as well as several imaging tools. The lab is built around an electron-beam lithography tool (Raith e-Line) which can be used to pattern resist thin-films with minimal structure sizes of the order of 10 nanometer. The resist layers can be used to transfer the pattern into other thin-films that are either deposited using an electron-beam evaporator (Temescal FC-2000) or a spin-coater. For the pattern transfer a reactive-ion etcher (RIE, Plasmatherm 790+) is available as well as a wet-bench fumehood to perform wet-etch and lift-off processes. An improvised UV-exposure setup is available for crude patterning.
In addition we have several imaging and analysis tools like Optical Microscopes, an AFM, a Thin Film measurements system and a Contact Angle measurement system.
We use this WikiMedia site for documentation of all equipment, facilities and standard operating procedures of the laboratory. As a registered user of the laboratory you will receive permission to log into this site, which will allow you to contribute to the documentation and give information on the processes particular to your project.
Equipment and Standard Operating Procedures (SOPs)
- Nanogroup lab-spaces: Clean room and chemical lab-spaces as well as characterisation tools
- Primary staff: Martin Greve & Sabrina Eder
- Access: to access the Nanogroup lab-spaces one requires an introduction and basic training by UiB personnel.
_______________________________________________
- Electron-beam lithography: Raith e-Line
- Owner: Martin Greve & Sabrina Eder
- Reservation: e-line google calendar
- SOP imaginng: File:Raith_imaging SOP_2023.pdf
- SOP lithography: File:SOP_Raith_E-Line_2023.pdf
- Maintenance: File:SOP_Raith_E-Line_Maintenance_2023.pdf
- Sputter coater
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: File:SOP_Mini_SputterCoater_2023.pdf
_______________________________________________
- Electron-beam evaporator: Temescal FC-2000
- Owner: Martin Greve & Sabrina Eder
- Reservation: Temescal google calendar
- SOP: File:SOP_Temescal_EbeamEvaporator_2023.pdf
- Maintenance: File:SOP_Temescal_EbeamEvaporator_Maintenance_2023.pdf
- Optical microscope & Stereomicroscope: Nikon Eclipse LV100ND & Nikon SMZ 1500
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP Eclipse LV100ND: File:SOP_Nikon_LV_1000_2023.pdf
- SOP SMZ 1500: File:SOP_Nikon_SMZ 1500_Stereomicroscope_2023.pdf
- Manual Eclipse LV100ND: ask Sabrina for .pdf file.
- Contact Angle Measurement System: dataphysics OCA 20L
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: File:SOP_Contact Angle_2023.pdf
- Manual OCA 206 E: ask Sabrina for .pdf file.
- Mask Aligner: High End Mask Aligner MJB4 SÜSS Micro Tec
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: File:SOP_Mask Aligner_2023.pdf
- Manual MJB-4: ask Sabrina for .pdf file.
_______________________________________________
- Reactive-ion etcher: Plasmatherm 790+
- Owner: Martin Greve & Sabrina Eder
- Reservation: Plasmatherm google calendar
- SOP: File:SOP_Plasmatherm_790Plus_2023.pdf
- Maintenance: File:SOP_Plasmatherm_790Plus_Maintenance_2023.pdf
- UV-lithography setup
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: direct training
- Spin-coater
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: File:SOP_Laurell WS 400BX Spin coater_2023.pdf
- Manual: File:LITE_Manual_WE-400BX_Spin coater_c.pdf
- Thin-film characterization: Filmetrics F-10
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: File:SOP_Filmetrics_2023.pdf
_______________________________________________
- Atomic Force Microscope: Jupiter AFM Oxford Instruments - Asylumn Research
- Owner: Martin Greve & Sabrina Eder
- Reservation: AFM google calendar
- SOP: File:SOP_Jupiter AFM_2023.pdf
- Manual:
- AR Jupiter User Guide_19C: ask Sabrina for .pdf file.
- AR Applications Guide_19C: ask Sabrina for .pdf file.
_______________________________________________
- Fluorination Chamber: SPTS XETCH
- Owner: Martin Greve & Sabrina Eder
- Reservation: no reservation needed
- SOP: File:SOP_XetchX3_Fluorination chamber_2023.pdf
- Manual:File:Xactic-XetchX3-System-Manual.pdf
Procedures
- Lift-off
- Chrome wet-etch
- Owner: Martin Greve
- SOP: File:SOP_chromewetech_2014.pdf
- old link: Standard Operating Procedures
- old link: Available fabrication tools and facilities
Facilities
- Equipment in nanolab: File:Nanogroup Instrumentation_2023.pdf
- Old Equipment list 2015: File:Equipment in Nano-Lab_2015.pdf
Here is a description of the available facilities (old): File:Facilities_2014.pdf.
Here is a summary of the maintenance documents (old): File:Facilities_Maintenance-2014.pdf.
- De-ionized water unit and Neutraliser
- Cooling Water
- Nitrogen 5.0 Pressure Swing Adsorption Unit
- Air Conditioning/Ventilation
- Pressurized Air and Nitrogen Supply
- Sketch_NanoLab
- Equipment File:Nano-Lab equipment_2014.png
- Safety File:Nano-Lab safety_2014.png
- Power sockets/electricity File:Nano-Lab power sockets_2014.png
Chemicals and Consumables
- Waste/Disposal
- Available consumables/chemicals and supplier information
- Main chemicals which should be always available
- Ordering
Laboratory Documents
- Basic rules for the laboratory (Rules|Laboratory Code of Conduct/Clothing rules, Safety|Safety Guidelines and Information, Cleaning|Waste disposal)
- Declaration document_Laboratory
- Alarm signals and power failures
- General tasks for the laboratory
- To-do list: File:Tasks in the laboratory-general_2015.pdf
People
- Guideline for new employees/students at ift
PhD students
MSc-Students
Further Information
There is a huge amount of information on Micro- and Nanofabrication on the web. Here are just some examples:
- MIT open course ware on nano processing [1]
- Resources at Chalmers (Swedish Nano-processing lab)[2]
- Useful recipes at Brigham Young University [3]
- Wikibook on Microtechnology [4]
Information on using MediaWiki
Consult the User's Guide for information on using the wiki software.